Frequently Asked Questions?

Will Pops-A-Dent eliminate my dent 100%?
It depends on the size and location of the dent. Pops-A-Dent works with excellent results however you will achieve the best results with smaller dents. For larger dents you must repeat the relocating the bridge in a clockwise rotation and repeat until you reach desired results. Choose a glue pad stem that best fits the size of your dent.

How long should I heat the glue gun before applying the glue to the glue pad stem?Heat the glue gun with glue stick for no more than 5 minutes for best results. Use caution when handling glue gun and hot glue.

How long should I leave the glue pad on my vehicle?
Let the glue dry for approximately 3 - 5 minutes. The glue should be firm. Do not leave the glue pad on your vehicle for longer than 8 minutes. If you do not achieve desired results simply repeat the process. If you accidentally leave glue pad on car for longer than 8 minutes and the pulling bridge “bottoms out” (the glue gun does not “pop” off) simply apply slight pressure to left or right side of the bridge for release.

What if the knob is popping off prematurely after I turn the knob?
The ideal temperature range to perform your dent removal is from 65-85 degrees F. The car may be too cool and should be moved to a location that will meet the temperature range. Move the vehicle to a garage or use a hair dryer to heat the surface.

Will the glue leave a residue on my car?
Pops-A-Dent glue pads feature a patent-pending design which prevents glue residue from remaining on the surface of the vehicle. In the unlikely event there is a residue left on your vehicle or on the glue pad after removal simply use isopropyl alcohol to remove it.Will the glue damage the paint on my car?
Pops-A-Dent is for use on original paint from vehicle manufacturers only. If the vehicle has cracked or chipped paint, applying glue and pulling the dent may cause additional paint to come off.Will the pressure from the Pops-A-Dent bridge add dents to my vehicle or increase the damage?
Pops-A-Dent features a patent-pending bridge design which distributes the pressure evenly throughout the bridge preventing the risk for additional damage or dents.What if the pulling bridge “bottoms out” and doesn’t pop the glue pad and stem off my car?
If you accidentally leave glue pad on car for longer than 8 minutes and the pulling bridge “bottoms out” (the glue gun does not “pop” off) simply apply slight pressure to left or right side of the bridge for release.

Pops-a-Dent includes:

• Pops-a-dent patent pending dent puller
• 2 Dent removal stems for different size dents
• Professional glue gun
• One Double super-size glue stick
• Knockdown tool
• Complete instructions